How To Change A Helix Piercing For The First Time

We explicate how you can hands change your piercing jewelry yourself. Rings, rods, etc. you will larn information technology in no fourth dimension!

Nosotros ofttimes go the question of how to change piercings. In order to do and so, y'all volition first have to open your piercing or loosen it. Opening or closing piercing jewelry may seem difficult, just it doesn't accept to be! It can be a flake tricky at first, and although you might prefer to exit information technology to someone else, information technology's easy once you notice out how to exercise this yourself. We volition explain and guide you through information technology below.

Tips:
Slippery jewelry? Clean them with some (piercing) soap and pat them dry with make clean kitchen paper, and then y'all have a better grip.

Demand fifty-fifty more grip? Wear nitrile gloves, and so y'all have an even meliorate grip on your jewelry.

Do you lot change the jewelry above the sink? Then place a towel in it to prevent the ball or slice of jewelry from disappearing into the gutter or billowy out of the sink and ending upwards on the floor.

Irresolute bars with screw-on figures? Concur the accessory tightly and plow the rod to release your jewelry.

What you should non do:

Practice not use pliers to turn the brawl on the rod. You might employ also much force and twist the thread. This is certainly a risk with internally threaded jewelry.

Is your piercing irritated or not healed enough? In that case, irresolute your jewelry is rarely a good idea. Get out the jewelry on until your piercing is completely healed.

Labrets, barbells and other threaded rods

How do I change a labret bar or barbell?

barbell

Concord on to the piercing rod on one side between your thumb and forefinger. So loosen the piercing ball and place it in a container. Now you can change your jewelry. Spiral the ball back on after the switch and y'all're done! If you are wearing a different figure (such as a feather, flower or cluster) then twisting/turning the piercing rod instead of loosening the figure might work better. It is more difficult to agree onto a screw-on slice with an unusual shape, but past turning the rod instead of the figure, information technology commonly works.

Which way do you have to unscrew to go your piercing loose? Seen from higher up, you tighten your piercing clockwise and loosen it again. In the mirror, it'due south reversed and that tin exist confusing! Endeavour to call up of information technology in the same way every bit when you tighten or unscrew the cap of a bottle.

Changing your piercing when the jewelry is however attached through the hole in your pare requires a little more practise. Take your time and wear rubber (cleaning) gloves. The gloves provide a better grip on the jewelry, which makes changing it a lot easier. Hold your piercing rod with ane paw and loosen the brawl with the other. Y'all can now change your piercing jewelry. After the change, turn the ball back on and you're done!

Opening and endmost rings

Segment rings are great piercing rings to wear if you don't change them as well often. You can open up a segment ring by bending the ends to the side. Make sure that the opening is big enough for your piercing, change your piercing and curve the ends back together. Never open up a segment ring by pulling the ends apart, this fashion you will deform the ring and no longer exist able to article of clothing information technology.

17a

Opening and endmost click rings

A click band makes it much easier to change your piercing jewelry. All yous have to do is click open the ring, alter it, and close it. The easiest style to open up a click ring is to grab information technology by the side that clicks open. If y'all endeavor to open the ring at the hinge, it volition not work. Grab both ends of the click ring between your thumb and forefinger and gently pull the ring open up. Closing the ring is done in the aforementioned style, only by pushing the ends together over again until they click together. Use just your fingers! Click rings are a chip more flexible than other piercing rings and if you decide to become creative and employ a pair of pliers you tin impairment your jewelry considerably.

Accept y'all bent the jewelry too far open or as well close?

Doesn't your click ring close (anymore) completely? Then your click ring will probably have to exist reshaped again. You lot do this by angle the band a fiddling further open up or closed. This is done in no time!

If y'all have whatsoever more than questions, nosotros are more than happy to help!

Visit us in store, requite us a call, or shoot us a message on WhatsApp!

If you want to get a new piercing, it is at present possible to schedule your appointment with us! Get pierced when information technology suits you! Y'all tin pay correct abroad, so you don't accept to think about it during your appointment.

Aphraheals - Piercing Aftercare

Aphraheals